EN | FR
{path}
Ti154 / {description}
Ti154
 

  • 529,00 € VAT
  • CODE : H10412
  • EAN : 3662009014883
4 x 150 W Amplifier

The perfect music of silence
When silence is a very important factor, you can rely on the Ti series which works as silently as possible. That makes them perfect for studio, permanent installations and theatres.
These Class D amplifiers feature SMPS units and offer a perfect sound reproduction despite their ultra-compact size.

With every connection you need they're perfectly adapted for any sound system, studio, and even HiFi applications.
They also feature thermal and electronic protections, so you can operate them safely and with great serenity.
  • Light and compact
  • Designed for studio and ambiance installation
  • Up to 8 speakers in stereo mode
PDF data sheet

  • Technical data
  • Downloads
OVERVIEW • Class-D amplifier • Switched-mode power supply • Mode selection: Stereo, Bridge or Parallel • Independent limiter for each channel • Extremely accurate and independent level settings for each channel • LEDs indicators • Convection cooled • Combo XLR/Jack • Unbalanced RCA outputs • Binding post-jacks or Speakon® outputs • Short-circuit, over current and high temperature independent protections for each channel • 2x19" rack mount spaces TECHNICAL SPECIFICATIONS • Stereo power output: - 4 Ohms RMS stereo power (minimum): 4 x 150 W RMS - 8 Ohms RMS stereo power: 4 x 80 W RMS • Mono bridged power output: - 8 Ohms bridged power (minimum): 2 x 300 W RMS • Signal-to-noise ratio Less than 90 dB • Input sensitivity: 4 dBu +/-2 dB • Distortion: - THD at 1kHz 1/2 rated power Less than 0.1% - Slew rate: - 65 dB at 1 kHz • Frequency response (4 ?/1 W): +0.5 dB ; 20 Hz-20 kHz • Input impedance : unbalanced 15 kOhms / Balance 30 kOhms • Clip: 0 dBr • Cooling: Convection cooled • Input connectors: - Combo XLR/Jack • Output connectors: - Binding post-jacks + 4-pole Speakon® • Front control panel - AC power switch, Channel 1 and 2 volume • Rear control panel - Mode selection button • Indicators: Protect (red) / Clip (yellow) / Signal (green) • Protections: Short-circuits, over current and high temperature protected • Power supply: 100/230 VAC - 50/60 Hz • Dimensions: 482 mm x 44 mm x 330 mm • Net weight: 4.3 kg
  • User guide