EN | FR
Amplifiers

SMi1000

SMPS Audio amplifier
2 x500W @ 4 Ohms
SMi1000 / SMPS Audio amplifier
2 x500W @ 4 Ohms
Code : H9828

SMi1500

SMPS Audio amplifier
2 x750W @ 4 Ohms
SMi1500 / SMPS Audio amplifier
2 x750W @ 4 Ohms
Code : H9829

SMi600

SMPS Audio amplifier
2 x300W @ 4 Ohms
SMi600 / SMPS Audio amplifier
2 x300W @ 4 Ohms
Code : H9827

AS-220

2 x 120 W RMS Amplifier
AS-220 / 2 x 120 W RMS Amplifier
Code : H7577

AS-420

2 x 200 W RMS Amplifier
AS-420 / 2 x 200 W RMS Amplifier
Code : H7578

AS-620

2 x 300 W RMS Amplifier
AS-620 / 2 x 300 W RMS Amplifier
Code : H7593

Ti154

4x150W Amplifier
Ti154 / 4x150W Amplifier
Code : H10412

Ti300

2x150W Amplifier
Ti300 / 2x150W Amplifier
Code : H9672

Ti500

2 x 250W amplifier
Ti500 / 2 x 250W amplifier
Code : H9673

WA-4X3

4-channel amplifier
WA-4X3 / 4-channel amplifier
Code : H9066
{path}
Ti500 / {description}
Ti500
  • CODE : H9673
  • EAN : 3662009002026
2 x 250 W Amplifier

The perfect music of silence
When silence is a very important factor, you can rely on the Ti series which works as silently as possible. That makes them perfect for studio, permanent installations and theatres.
These Class D amplifiers feature SMPS units and offer a perfect sound reproduction despite their ultra-compact size.

With every connection you need they're perfectly adapted for any sound system, studio, and even HiFi applications.
They also feature thermal and electronic protections, so you can operate them safely and with great serenity.  
PDF data sheet

  • Technical data
  • Downloads
OVERVIEW
• Class-D amplifier
• Switched-mode power supply
• Mode selection: Stereo, Bridge or Parallel
• Independent limiter for each channel
• Extremely accurate and independent level settings for each channel
• LEDs indicators
• Convection cooled
• Balanced Jack TRS and XLR inputs
• Unbalanced RCA outputs
• Binding post-jacks or Speakon® outputs
• Short-circuit, over current and high temperature independent protections for each channel
• 2x19" rack mount spaces


TECHNICAL SPECIFICATIONS

• Stereo power output:
- 4 Ohms RMS stereo power (minimum): 2 x 250 W RMS
- 8 Ohms RMS stereo power: 2 x 130 W RMS

• Mono bridged power output:
- 8 Ohms bridged power (minimum): 1 x 500 W RMS

• Signal-to-noise ratio Less than 90 dB
• Input sensitivity: 4 dBu +/-2 dB

• Distortion:
- THD at 1kHz 1/2 rated power Less than 0.1%
- Slew rate: - 65 dB at 1 kHz

• Frequency response (4 O/1 W): +0.5 dB ; 20 Hz-20 kHz
• Input impedance : unbalanced 15 kO / Balance 30 kOhms
• Clip: 0 dBr
• Cooling: Convection cooled

• Input connectors:
- XLR, Balanced Jack TRS + Unbalanced RCA

• Output connectors:
- Binding post-jacks + 4-pole Speakon®

• Front control panel
- AC power switch, Channel 1 and 2 volume
• Rear control panel
- Mode selection button

• Indicators: Protect (red) / Clip (yellow) / Signal (green)
• Protections: Short-circuits, over current and high temperature protected
• Power supply: 100/230 VAC - 50/60 Hz
• Dimensions: 482 mm x 44 mm x 330 mm
• Net weight: 4.3 kg
  • User guide